User's Manual

Tele
Eye
RX
User
Guide Page 35
Setup
Tele
Eye RX for Broadband or Narrowband
Internet Connection with Static IP
Step 6: Press the “Menu button to pop up the
[MAIN MENU] on OSD.
Step 7: Use Up
or Down button to
select [SETUP] option and press “Enter
button to enter the [SETUP] sub-menu.
Step 8: Select [VIDEO] option and press “Enter
button to enter the [VIDEO] sub-menu.
Step 9: Select [VIDEO FORMAT] and press
Left
or Right button to set
either [NTSC] or [PAL] option. (All
cameras should have the same video
format).
Step 10: You can always press “Live
button to
exit any menu operation and start live
monitoring.
Setup
Tele
Eye
RX
transmitter IP through CCTV monitor, please go to
step 11a
.
Setup
Tele
Eye RX transmitter IP through PC, through PC, please go to step11b.
MAIN MENU
SETUP . . .
BACKUP TO CD-R . . .
SWITCH CONTROL . . .
SCAN / FORMAT DISK . . .
TRANSMITTER INFO . . .
SHUT DOWN ENTER
VIDEO
CAMERA SETTING . . .
LOCAL MONITORING . . .
OSD COLOR BLUE
VIDEO FORMAT PAL
SETUP MENU
VIDEO . . .
RECORDING . . .
SWITCHES . . .
DATE / TIME . . .
CONNECTION . . .
EVENT HANDLER . . .
TRANSMITTER . . .
RESTORE FACTORY SETTING ENTER