User's Manual

Tele Eye
RX
User
Guide Page 32
Setup
Tele Eye RX for LAN Connection with Static IP
Step 14: Run WX-30 software at any local
network PC. (For details of WX-30
software installation, please refer to
WX-30 Software Guide)
Step 15: Press [Connect] icon to pop up
the [Connect Window]. For
example, type and select the
following setting :
Phone/IP : 210.17.139.145
Connect Using: TCP/IP LAN
Password: 000000
Step 16: Press [Connect] icon to
connect your PC and the transmitter.
The video appears on the WX-30 if
success. Otherwise, the [Warning]
board will pop up and show you
failure message. For failure case,
please press [Connect]
icon to
check that the connection setting is
valid or not.