User's Manual

ManualsBrandsSignal Communications ManualsElectronicsTeleEye RX Series

Tele

Eye

User

Guide Page 31

Setup

Tele

Eye RX for LAN Connection with Static IP

10/100 BASE-T

LINK COL



In Windows 2000/XP desktop, select

Start > Control Panel

 Double click Network and Dial-up

Connections > right click Local Area

Connections and choose Properties.



Choose Internet Protocol (TCP/IP) and

click Properties

 Enter the IP address, subnet mask and

Default gateway for the PC to restore to

its original network configuration. Note

that the first 3 field of IP address should

be same as

Tele

Eye

RX transmitter IP

and gateway address. IP address is

“210.17.139.146” and gateway address is

“210.17.139.1” in this example.

 Click OK to apply the setting

Step 12: Disconnect the

Tele

Eye RX transmitter and current PC. Reconnect the transmitter

and current PC to the LAN network through straight-through Ethernet cable.

Step 13: Check Ethernet socket of both

Tele

Eye RX transmitter and PC to ensure that the

{GREEN LINK LED} turns ON. Then connection diagram is shown as follows:

RG59 cable

Power Adapter

Ethernet

Socket

CCTV

Monitor

Tele

Eye RX

Cameras

Network switch

210.17.139.145

210.17.139.146

210.17.139.147

Straight-through Ethernet cable