User's Manual

Tele Eye
RX
User
Guide Page 29
Setup
Tele Eye RX for LAN Connection with Static IP

Choose [Transmitter] 

 [Registration]
to register the
Tele
Eye RX transmitter.
User needs to input transmitter serial
number and registration code.
For example :
Serial No. : VTC12345
Registration Code : 1234567890
 Press [Connect] icon to pop up the
[Connect Window]. Type and select the
following setting :
Phone/IP : 192.168.0.2
Connect Using: TCP/IP LAN
Password: 000000
IP (192.168.0.2) and Password (000000)
are default setting of
Tele
Eye RX
 Press [Connect] icon to
connect your PC to the transmitter. Live
video is shown on the WX-30 if success.
Otherwise, the
[Warning]
board will pop
up and show you failure message. For
failure case, please press [Connect]
icon to check that the connection setting is
valid or not.
 Press [Transmitter Setup] icon to
show
Tele
Eye RX configuration menu.

Select [Connection] and press [Network
Settings
]
icon to