User's Manual

Tele Eye
RX
User
Guide Page 25
Setup
Tele Eye RX for LAN Connection with Static IP
Step 11a: Configure
Tele
Eye RX transmitter IP setting through CCTV Monitor
RG59 cable
Power Adapter
Ethernet
Socket
Tele Eye RX
Cameras
CCTV
Monitor
RG59 cable
192.168.0.2
 Press the “Menu” button such that the OSD
main menu
opens on the monitor.
 Use “Up” or “Down” button to select
[SETUP] option and press “Enter”
button
to enter [SETUP] sub menu.
 Select [CONNECTION] option and press
“Enter”
button to enter connection setting
menu.
 Select [TCP/IP] option and Press “Enter”
button
 Select [IP] option and press “Enter” button.
IP address consists of four fields. Each field can
assign a number from 0 to 255
SETUP MENU
VIDEO . . .
RECORDING . . .
SWITCHES . . .
DATE / TIME . . .
CONNECTION . . .
EVENT HANDLER . . .
TRANSMITTER . . .
RESTORE FACTORY SETTING ENTER
CONNECTION
TCP / IP …
MODEM …
TCP / IP
IP 192.168.0.2
PORT 1024
SUBNET MASK 255.255.255.0
ENABLE GATEWAY NO
GATEWAY 0.0.0.0
ENABLE DNS NO
PRIMARY DNS 0.0.0.0
SECONDARY DNS 0.0.0.0
SURELINK …