User's Manual

Tele Eye
RX
User
Guide Page 150
Connection with PTZ cameras
Note that i
f
there is no driver to su
pp
ort
y
our P/T/Z
cameras, please refer to WX-30 software upload
PTZ driver section
Step 8: Select [PTZ DRIVER] option and press
“Enter”
button to select P/T/Z
cameras driver. According to the P/T/Z
camera model, please select a certain
driver for required PTZ camera and press
“
Enter
”
button to save the setting.
Step 9: Select [BIT RATE] option and use “Left”
or “Right” button to set bit
rate corresponding to your P/T/Z cameras.
Press “Back” button to go to [PTZ
SETTING] menu
Step 10: Select [PAN SPEED] and [TILT
SPEED] options and use “Left”
or
“
Right
”
button to change the pan
(horizontal direction) and tilt (vertical
direction) speed of the PTZ camera.
Step 11: Select [PTZ MOVEMENT] option and
press “Enter”
button to change PTZ
movement timing setting
A
DVANCED PTZ SETTING
PTZ DRIVER TELEEYE DM S . . .
BIT RATE 4800
PTZ SETTING
PAN SPEED FAST
TILT SPEED FAST
PTZ MOVEMENT SETTING . . .
ADVANCED PTZ SETTING . . .