User's Manual

Tele Eye
RX
User
Guide Page 140
Event Action
V. Event LED
Event LED
The event LED is the LED built on the front panel of
Tele Eye RX transmitter . If an event
trigger, the LED is blinking until the event is clear.
Event LED Action setup procedure
Step 1: In the action menu, select
[EVENT LED]
option and press “Enter”
button to
enter the event LED action setting menu.
Step 2: Select [ENABLED] option and use “Left”
or “Right” button to enable
(i.e. set the value to [YES]) event LED
action.
Step 3: You can press “Live”
button to exit
OSD menu or press “Back”
button to
enter action menu again.
XXXXXXX ACTION
RECORDING …
SWITCH …
DIALBACK …
BUZZER …
EVENT LED …
LIVE CAMERA …
PTZ …
XXXXXX X EVENT LED
ENABLED YES