User's Manual

Tele Eye
RX
User
Guide Page 138
Event Action
IV. Buzzer
Buzzer
This buzzer contains inside the
Tele
Eye RX transmitter. It can produce “Beep” sound in
order to draw nearby operator attention about an event trigger.
Duration
Duration is the period for turning on the buzzer.
Action Delay
Action delay is the period after turning off the buzzer turning on.
Buzzer Action setup procedure
Step 1: In the action menu, select [BUZZER]
option and press “Enter”
button to
enter the buzzer action setting menu.
Step 2: Select [ENABLED] option and use “Left”
or “Right” button to enable
(i.e. set the value to [YES]) buzzer action.
Step 3: Select [GENERAL BUZZER SETTING]
option and press “Enter”
button to
enter the buzzer setting menu.
Step 4: Select [DURATION] option and press the
“Left”
or “Right” button to
choose the duration.
XXXXXXX ACTION
RECORDING …
SWITCH …
DIALBACK …
BUZZER …
EVENT LED …
LIVE CAMERA …
PTZ …
XXX
X
XX X BUZZER
ENABLED YES
GENERAL BUZZER SETTING . . .
GENERAL BUZZER SETTING
DURATION 10SEC
ACTION DELAY 10SEC