User's Manual
Tele
Eye RX User
Guide Page 8
Rear Panel Description
F. Rear Panel Description
I. Video Input Connectors
- Channel 1 – Channel 4 (for
Tele
Eye RX304 only)
- {Standard BNC connectors} for video source input
-
A composite video source from camera should be supplied to these connectors
II. Video Output Connector
- A composite video signal with 1V p-p is output from this connector
- Support PAL or NTSC format
- PAL/CCIR format with 625 lines, 50 fields per second
- NTSC/EIA format with 525 lines, 60 fields per second
III. Audio In/Out Port
**
- {Audio In} : Connect audio input device (e.g. microphone) with RCA jack to
Tele
Eye RX transmitter for recording
- {Audio Out} : Connect audio output device (e.g. speaker) with RCA jack to
Tele
Eye
RX transmitter and generate output audio signal
- {Audio PA} : Connect audio output device (e.g. speaker) to
Tele
Eye RX transmitter
and generate audio signal as remote public addressing enable
**
: This function will be supported in the
Tele
Eye RX transmitter version 2.00.00 or later.