User's Manual

Tele Eye
RX
User
Guide Page 123
Event Handling
V. Video Loss
Video Loss
Video loss can be triggered when the video channel input disappears. It will happen if the
transmitter receives no signal from the camera. The local CCTV monitor displays a blue screen
for video loss condition.
Video Loss Setup Procedure
Step 1: Press “Menu” button, select
[SETUP] option and press “Enter”
button to enter [SETUP] sub
menu. Select [EVENT HANDLER]
option and press “Enter” button.
Step 2: Select [VIDEO LOSS] option and
press “Enter”
button to show the
camera selection menu. Select a camera
and press “Enter”
button to enter
the video loss setting menu.
Step 3: Select [ENABLED] option and use
“Left”
or “Right” button
to enable (i.e. set the value to [YES])
video loss event handler.
SETUP MENU
VIDEO . . .
RECORDING . . .
SWITCHES . . .
DATE / TIME . . .
CONNECTION . . .
EVENT HANDLER . . .
TRANSMITTER . . .
RESTORE FACTORY SETTING ENTER
EVENT HANDLER
ARM / DISARM . . .
SECURITY SWITCH . . .
ALARM . . ..
MOTION . . .
VIDEO LOSS . . .
SYSTEM TAMPER . . .
POWER FAILURE . . .
VIDEO LOSS X SETTING
ENABLED YES
ACTION …