User's Manual

Tele Eye
RX
User
Guide Page 118
Event Handling
Alarm Setup Procedure
Step 1: Press “Menu” button, select
[SETUP] option and press “Enter”
button to enter [SETUP] sub
menu. Select [EVENT HANDLER]
option and press “
Enter
”
button.
Step 2: Select [ALARM] option and press
“Enter”
button to show the alarm
selection menu. Select appropriate
alarm and press “Enter”
button to
enter the alarm setting menu.
Step 3: Select [ENABLED] option and use
“Left”
or “Right” button
to enable (i.e. set the value to [YES])
alarm.
Step 4: Select [SENSOR TYPE] option and
use “Left”
or “Right”
button to choose sensor type according
to the configuration of
Tele
Eye RX
alarm sensor control circuit type.
SETUP MENU
VIDEO . . .
RECORDING . . .
SWITCHES . . .
DATE / TIME . . .
CONNECTION . . .
EVENT HANDLER . . .
TRANSMITTER . . .
SHUT DOWN ENTER
EVENT HANDLER
ARM / DISARM . . .
SECURITY SWITCH . . .
ALARM . . .
MOTION . . .
VIDEO LOSS . . .
SYSTEM TAMPER . . .
POWER FAILURE . . .
A
LARM 1 SETTING
ENABLED YES
SENSOR NAME ALARM 1
SENSOR TYPE NO
SENSOR TAMPER TYPE NONE
ZONE TYPE NORMAL
ENTRY DELAY 0 SEC
EXIT DELAY 0 SEC
ACTION …
A
LARM 1 SETTING
ENABLED YES
SENSOR NAME ALARM 1
SENSOR TYPE NC
SENSOR TAMPER TYPE NONE
ZONE TYPE NORMAL
ENTRY DELAY 0 SEC
EXIT DELAY 0 SEC
ACTION …