User's Manual

Tele Eye
RX
User
Guide Page 117
Event Handling
Initial State
Arm Security Switch Alarm
Step 1 Step 2 Step 3 Result
Entry / Exit Zone
Disarm
No alarm trigger.
Recording stops
Arm On No trigger
Security switch
off
Trigger alarm.
Entry delay starts.
Recording starts (if
recording action is
enabled)
Arm
Alarm is triggered
Recording does not
stop unless user disarm
the system
Disarm Uninstall No trigger Arm
Trigger alarm.
Exit delay starts.
Recording starts (if
recording action is
enabled)
Exit delay ends
after the preset exit
time value.
Recording stops
The system will enter
entry delay
automatically after
next alarm trigger
Disarm \
No alarm trigger.
Recording stops.
Arm Uninstall No trigger
Trigger alarm.
Entry delay
starts.
Recording starts
(if recording
action is enabled)
Arm \
Alarm is triggered.
Recording does not
stop unless user disarm
the system.
Disarm No trigger Trigger alarm \ \ No alarm trigger
Uninstall No trigger Trigger alarm \ \ Alarm trigger
Uninstall Uninstall No trigger Trigger alarm \ \ Alarm trigger
Physical Configuration for Alarm
The alarm input and ground of
Tele
Eye RX transmitter need to connect to various kinds of
sensors which are commonly installed at entrance or special part of the surveillance area.
Alarm
Senor
Alarm Input
Ground