User's Manual

Tele

Eye

User

Guide Page 112

Event Handling

Example of Entry/Exit Zone WITH Security Switch Usage

For Entry Zone :

The entry delay is the period of time between entering the surveillance zone and reaching the

transmitter. In order to disarm the system for maintenance or repair, user / installer needs to turn

off the security switch and enter the surveillance zone. However, the delay time starts from the

trigger by the 1

alarm sensor (i.e. Alarm 4). Note that if user enables recording action,

recording action is automatically activated during entry delay.

The detail procedure is as below:

1) user turns off security switch

2) the alarm is at entry delay

3) the 1

trigger is made by Alarm 4 (i.e. user enter the surveillance zone and the entry delay

time begin)

4) 2

, 3

and 4

trigger are made and each entry delay starts respectively

5) user disarms the system for maintenance

For example: If the time for going from security switch to transmitter is about 8 minutes, Delay

1 should be longer than 8 minutes, while Delay 2 should be longer than the time for going from

security switch to Alarm 2, and so on.

Alarm 4Alarm 3Alarm 2Alarm 1

Entry

Security Switch

Surveillance zone

Delay4Delay3Delay2Delay1

Time line

Tel

Eye RX

DISARM