User's Manual

Tele Eye
RX
User
Guide Page 109
Event Handling
Security Switch Setup Procedure
Step 1: Press “Menu” button, select
[SETUP] option and press “Enter”
button to enter [SETUP] sub
menu. Select [EVENT HANDLER]
option and press “Enter”
button.
Step 2: Select [SECURITY SWITCH] option
and press “Enter”
button to show
security switch setting menu.
Step 3: Select [ENABLED] option and use
“Left”
or “Right” button
to enable (i.e. set the value to [YES])
the security switch function.
Step 4: Select [ON STATE] option and use
“Left”
or “Right” button
to choose on state according to the
configuration of
Tele
Eye RX
security
switch control circuit type.
SETUP MENU
VIDEO . . .
RECORDING . . .
SWITCHES . . .
DATE / TIME . . .
CONNECTION . . .
EVENT HANDLER . . .
TRANSMITTER . . .
SHUT DOWN ENTER
EVENT H
A
NDLER
ARM / DISARM . . .
SECURITY SWITCH . . .
ALARM . . .
MOTION . . .
VIDEO LOSS . . .
SYSTEM TAMPER . . .
POWER FAILURE . . .
SECURITY SWITCH
ENABLED YES
ON STATE OPEN
TAMPER TYPE NONE
ASSOCIATE SWITCH NO
TAMPER EVENT ACTION …
SECURITY SWITCH
ENABLED YES
ON STATE CLOSE
TAMPER TYPE NONE
ASSOCIATE SWITCH NO
TAMPER EVENT ACTION …