User's Manual

Tele Eye III+ Network Camera Installation Guide Page 2
Before You Begin
Repositioning of the Mounting Plate
At the bottom of the Network Camera is a mounting plate. The mounting plate can also be
removed and re-attached to the top of the Network Camera. The following is the procedure
for repositioning the mounting plate from the bottom to the top of the Network Camera.
IMPORTANT: TO PREVENT DISMANTLING OF THE NETWORK CAMERA, DO
NOT SIMPLY REMOVE ALL THE SCREWS FROM THE MOUNTING PLATE.
Please follow the procedures below.
1. Remove all the screws (1 – 4) from the bottom of the Network Camera.
2. Take off the plate.
3. Remove the 7
th
, and the 8
th
screws at the top of the Network
5
6
7 8
Bottom View
Top View
1
2
3
4
Wrong!!!