User's Manual

Tele Eye III+ Network Camera Installation Guide Page 28
Appendix
Step 4: Enter an IP address, subnet mask and Default gateway.
Step 5: Enter the Preferred and Alternate DNS server, if necessary.
Step 6: Click OK to activate the new IP.
Step 7: You have to confirm the IP address has been correctly set on your computer. On your windows,
click start > run, type “cmd” at Open field and pressed OK button, then type “ipconfig” on
the DOS prompt, you will see a IP set on your computer.
Router Configuration
Port Mapping in your Router
For PLANET Internet SOHO Router XRT-101 / XRT-711, please refer to its menu
6.1 Advanced Internet Features →
Virtual Servers (Define servers on your LAN, so Internet users can access them)→
E.3 User-defined Virtual Servers
Suggested Data for router:
Name TeleEye
IP Address 192.168.0.2 (Your Network Camera IP address)
Protocol TCP
Internal Port No. 1024
External Port No. 1024