User's Manual

Tele Eye III+ Network Camera Installation Guide Page 27
Appendix
IP Address Setup for Windows NT/2000/XP
The follow procedures will set your Ethernet Card IP address manually for your local
LAN purpose. Note that these procedures will NOT affect your PC to get on the Internet.
If you discover that you cannot be able to access to the Internet after applying the settings,
you have to undo the settings or re-install the software provided by your ISP and retry the
steps again.
Step 1: In Windows NT/2000/XP desktop, select Start > Settings > Control Panel
Step 2: Double click Network and Dial-up Connections > right click Local Area Connections and
choose Properties.
Step 3: Choose Internet Protocol (TCP/IP) and click Properties
Your Ethernet
card name