User's Manual

Tele

Eye

III+

Network Camera Installation Guide Page 19

Normal Operations of the Network Camera

NORMAL OPERATIONS OF THE

NETWORK CAMERA

Having completed the IP setup of the Network Camera, you are now ready to see live

streaming video from the Network Camera. To start viewing video, all that is required is a

computer with network capability and a Java supporting, standard web browser. To view

video from the Network Camera is very similar to how you browse the Internet.

Using Built-in Web Server

Before using the web service, you have to make sure that you have ENABLED the Built-in

Web Server feature when configuring the Network Camera. For details please read

Network Camera Configuration. In web browser, you can enter your registered

sureLINK address (e.g. http://www.network.camera.teleeye.net/

) or IP address with port

number (e.g. http://192.168.0.3:1024/

) to connect your Network Camera.

Step 1: Make sure the computer in use is capable of connecting to the Internet or the Local Area

Network (LAN). Also make sure your browser supports Java.

Step 2: Connect the Network Camera to your network by connecting a straight Ethernet cable from

the Network Camera Ethernet Port to a hub/switch. Alternatively, use a crossover Ethernet cable to

direct connect a computer with the Network Camera alone. Actually, there are different approaches in

installing the Network Camera to different types of network. For details on installing Network Camera,

please refer to Section 4 System Configuration and Installation

Step 3: Run your favourite web browser. At the address field at the top, enter the IP address of the

Network Camera in this format:

http://IP_address:port_number.

For example,

http://192.168.0.3:1024

. The IP is 192.168.0.3. The port number is 1024 which is the default port

number of the Network Camera.

SECTION