User's Manual

Tele Eye III+ Network Camera Installation Guide Page 13
System Configuration and Installation
 RJ-45 Network Cable
It is a shielded, straight-through RJ-45 network cable. The cable will connect
the
Tele Eye III+ Network Camera to the hub of the LAN for typical
application.
 Crossover Network Cable
Used to connect between a router and PC or the Network Camera
 Software
 Web-browser
A standard web-browser such as IE, and Netscape…etc.
 Information
 Valid IP address for the Network Camera.
 Administrator Password for the Network Camera (The default
administrator password is “000000”. You can change it in the
Reception Software)
 Port number for the Network Camera (default value is 1024)
 Your network subnet mask
 Your network gateway address (required by Network Types B1 & B2)
 2 DNS addresses ( Please ask your ISP for this information; required by
Network Types B1 & B2)