User's Manual

Tele Eye III+ Network Camera Installation Guide Page 11
First Time Setup of Network Camera
Step 2: You can change the connection, sureLINK, transmitter properties and camera control
settings. You can reload the configuration by clicking Reload button. Click on Save & Exit
button to save the changes.
The description of each setting type is listed below:
Setting Type Description
Connection Settings You can set IP address, port, subnet mask, gateway and DNS
as well as
Tele Eye Proxy Server settings. For a detailed
description, please refer to section “System Configuration and
Installation”.
sureLINK Settings You can enable sureLINK support in Network Camera. For a
detailed description, please refer to section “sureLINK
Technology”.
Transmitter Settings You can setup Network Camera for the other functions. For a
detailed description, please refer to section “General Terms
Discussion”.