User's Manual

Tele Eye III+ Network Camera Installation Guide Page 10
First Time Setup of Network Camera
Network Camera Setup with Crossover Ethernet Cable
Your computer is required to change the IP address (e.g. 192.168.0.3). Please refer to
Section A Appendix
for a detailed descriptions for IP configuration on different operating
systems.
If your computer has changed the IP address, you can connect Network Camera by plugging
Crossover Ethernet Cable from your computer to Ethernet port of Network Camera. You
can continue to setup Network Camera using built-in web-based configuration.
Network Camera Setup with Built-in Web-based Configuration
After you have assigned an IP address to your Network Camera, you can access Network
Camera configuration page in your web browser (e.g.
http://192.168.0.3:1024/setup.htm ). You
might need to enable Java in your web browser or to download the latest version of the Java
VM (go to
http://java.sun.com/getjava/index.html ).
To enter Network Camera configuration, follow the steps below:
Step 1: Enter default administrator password “000000” and click on Enter button. The following
page will be displayed and loaded with current Network Camera Settings.