User's Manual

Tele Eye III+ Network Camera Installation Guide Page 9
First Time Setup of Network Camera
Step 4: Select “NF” and enter Model No. (e.g. NF-610).
Step 5: Enter the Network Camera Serial Number and Registration Code to the fields provided.
Step 6: Insert a new, valid IP address of your desire to the provided field (e.g. 192.168.0.3).
Step 7: Click on Set Transmitter IP button to set the Network Camera to the new IP address.
Step 8: The program should now searching through the network to verify that the IP address you
requested is not already in use. The indicator bar on the right side shows the progress of the
current operation. If the setup is successful, the following window message should appear.
The Network Camera should have a valid IP address by now. You can continue to setup
Network Camera using built-in web-based configuration.