User's Manual

◆ SMC function

1) TV function (analog TV/digital TV)

This function is used with a TV capture card. If a TV tuner card is not installed in your system, you can not

use this function with SMC program.

z Running the TV program

1. Select ‘TV[ ]’ or ‘DTV[ ]’in the menu.

2. If this is the first time to run the SMC program, it will ask you for auto-scan as follows. Click YES to

proceed. (or by clicking ‘Auto-scan[

]’in the TV menu)

3. If the channel scan is finished, the following screen appears.

Screen window

Note

If you can not see a TV show on the screen, make sure the antenna is connected correctly.

Refer to page ~ for antenna connection.