User's Manual

95
VIEWING IMAGES ON A TV
The SD1 Merrill camera can be connected to a television or a video/DVD
recorder using the provided AV cable, allowing the recorded images to be
viewed on the television monitor or recorded on videotape/DVD.
TO CONNECT THE CAMERA TO A
VIDEO DEVICE
1
Open the connector cover.
2
Connect the AV cable to the ＜ USB /
VIDEO- OUT＞
terminal on the camera and
to the video input terminal on the television
or video recorder. (Please connect the yellow
plug to the video input terminal.)
3
Turn on the camera and the video device.
WARNING !!
• Please do not use any AV cable other than provided with your Sigma SD1
Merrill camera, when connecting a video input terminal. Using other brands
may cause damage.
TIP
• It is recommended that the camera be powered with the AC adapter
(optional) during television playback to avoid draining the battery.
• The default mode for the video signal is NTSC. When connecting the camera
to a PAL device, the [Video Mode] must be changed to [PAL] in [ Camera
Settings] (P.28).