User guide

14797 • November 2004 • Front Matter
Page iv
The following information is included for reference only. Please consult local electrical
codes for specific information relating to your situation. The power cords supplied with
this equipment provide the only means of mains disconnection. The socket-outlet
should be installed near the equipment and should be easily accessible as well as clearly
marked.
NORTH AMERICAN POWER SUPPLY CORDS
The North American power cords supplied with this equipment have a molded
grounding plug (NEMA 5-15P) at one end and molded grounding receptacle (IEC 320-
C13) at the other end (see figure below). Conductors are CEE color-coded: Light blue
(neutral), Brown (line) and Green or Green/Yellow (ground). Operation of this
equipment at voltages exceeding 130 VAC will require power supply cords which
comply with NEMA configurations.
INTERNATIONAL POWER SUPPLY CORDS
The International power cords supplied with this equipment have a molded grounding
receptacle (IEC 320-C13) at one end and a molded CEE7/7 plug at the other end (see
figure below). Conductors are CEE color-coded: Light blue (neutral), Brown (line) and
Green/Yellow (ground). Other IEC 320-C13 type power supply cords can be used if
they comply with the safety regulations of the country in which they are installed.