User guide

14797 • November 2004 • Communications Interface Setup
Page 18
Table 6. Frame ID Setting
Depending upon the controlling device’s operating parameters, the CI5705 may need to
have its communication speed changed. DIP switches SW4 and SW5 of S2 located at
the front of the CI5705 card are used to set the communication speed as detailed in
Table 6 below-
Table 7. Communication Speed
FRAME ID SW1 SW2 SW3
0 RESERVED
1 OFF ON ON
2 ON OFF ON
3 OFF OFF ON
4 ON ON OFF
5 OFF ON OFF
6 ON OFF OFF
7 OFF OFF OFF
SPEED SW4 SW5
9600 ON ON
19.2K OFF ON
38.4K ON OFF
57.6K OFF OFF