User guide

14797 • November 2004 • S5000 Frame Description
Page 5
S5000 FRAME DESCRIPTION
The S5000 Signal Management System (part number S5000) consists of a 2 rack unit
(RU) high metal frame assembly that installs in a standard 19” wide equipment rack.
The frame includes a built-in motherboard (EM0328) that provides module
interconnections and a power distribution board (EM0326) for distributing power from
the AC inputs to the power supplies.
A removable front door with built-in cooling fan provides cooling and EMI
suppression. Modules slide into the frame from the front and plug into the backplane
and motherboard. Information about the modules is presented in the individual module
User Guides.
Figure 3 illustrates the S5000 Frame front view (door open), showing the slots for the
slide-in printed circuit modules. The following list of printed circuit modules is keyed
to the numbers on the illustration:
Frame Front View
Figure 3. S5000 Front View with the Door Removed
Œ
PS5000 Power Supplies: Two power supply modules slide into the center of the frame from
the front. One is standard, the other redundant (optional). The power supplies accept 90-130/
180-250 VAC (auto-ranging) and produce DC power for all modules.
•
Left Bay of 5 Modules: Any of the available modules may be inserted into these slots, depend-
ing on the backplane. Note that different backplanes are required for
SDI/HD-SDI video, balanced AES and unbalanced AES.
Ž
Right Bay of 5 Modules: Any of the available modules may be inserted into these slots,
depending on the backplane. Note that different backplanes are required for
SDI/HD-SDI video, balanced AES and unbalanced AES.
•
CI5705 Communication Interface: The module that provides communication between mod-
ules in the frame and other frames is located above the power supply modules.
•
• Ž
Comm Intrfc
Card 10
Card 9
Card 8
Card 7
Card 6
Card 5
Card 4
Card 3
Card 2
Card 1
PS 1
PS 2
Œ