Operating instructions

Contact loading, max.

at voltage Maximum current

30 V DC 1 A.

The diaphragm rupture sensor is an NC.

–

For safety reasons we recommend connecting to a pro‐

tective low voltage, e.g. in accordance with EN 60335-1

(SELV ).

–

The cable can be connected as required.

5–25 V DC, in accordance with Namur or DIN 60947-5-6, potential-free

design.

Data Value Unit

Nominal voltage * 8 VDC

Power consumption - active surface

uncovered

> 3 mA

Power consumption - active surface cov‐

ered

< 1 mA

Rated switching distance 1.5 mm

* Ri ~ 1 kΩ

Cable colour Polarity

blue -

brown +

14.9 Stroke sensor "Sigma"

Install the sensor according to the chapter "Installation, elec‐

trical".

For more information, see "Pacing relay" in the "Relay" chapter.

a) Contact (Standard for identity code

specification "Displacement body“: A)

a) Namur sensor (for identity code specifi‐

cation "Displacement body“: A)

a) Pacing relay (stroke sensor with ...)

(Identity code specification "Stroke

sensor": 2)

Technical data