Owner's manual

ROX 6.0
www.sigmasport.com ROX 6.0 Page 28
Setting the trip climb or descent
General ROX 6.0 functions
6 Press the
Set
button to start and stop the countdown.
If the countdown is running, the icon
appears on the display.
The icon flashes once the countdown has reached zero.
7 Resetting the countdown to the configured start value:
Press and hold the
Reset
button for three seconds.
5.8 Setting the trip climb or descent
The trip ascent (+) and descent (-) are separately displayed.
Switch between trip ascent (+) and descent (-) as follows:
1 Press the
Mode 1
button to switch to Trip Climb.
2 Press and hold the
Set
button for three seconds. “Trip Climb/Desc” flashes
on the display.
3 Press
Mode 2
to switch the display to Trip Climb (+) or Descent (-).
4 Press the
Set
button to save your setting.
“Set OK” appears on the display.
5.9 Resetting trip data
1 Press and hold the
Reset
button for more than three seconds.
2 “Trip data RESET” flashes on the display.
Use this function to reset the following values to zero:
Trip distance, ride time, ∅ speed, max. speed, ∅ cadence, altitude +/-, altitude
profile, max. altitude, lap distance, lap time, intensity zones, ∅ heart rate, max.
heart rate, calories.
5.10 Total values for bike 1 and bike 2
If you only use the ROX 6.0 on one bike, only the total values for the first bike will
be displayed.
If you also use a second bike, the total values are displayed under “bike 1”,
“bike 2” and “bike 1+2”.
5.11 Service interval
The optional service interval notifies you once a set distance has been ridden.
The service interval is an on screen reminder for regular bike maintenance. The
service interval can only be set with a Universal Fast Setting Box (UFSB) at your
local bike shop. Once the preset distance has been reached ‘Inspection’ appears
on the display. Press any button to clear this message.
Note:
The Service Interval default is OFF
Mode 2
Mode 1Set
Reset