Operating instructions

5
www.sigmasport.com
SIGMA DAtA Center 3
The following software and hardware is required to use DATA CENTER 3:
– Intel Core™ Duo or a faster processor
– 512 MB RAM (1 GB recommended)
– MacOs X Version 10.6 or 10.7
2.2.2 MAC COMPUTER
2.3 INSTALLING THE SOFTWARE
2.3.1 INSTALLATION ON A WINDOWS COMPUTER
1
Before starting the installation, close all running applications.
2
Start the file DataCenter_3.exe.
3
Follow the on-screen installation instructions.
4
Start the application.
2.3.2 INSTALLATION ON A MAC COMPUTER
1
Before starting the installation, close all running applications.
2
Start the file DataCenter3Setup.dmg.
3
Follow the on-screen installation instructions.
4
Start the application.
2.3.3 UPDATING DATA CENTER
DATA CENTER 3.0 is installed alongside an existing
DATA CENTER. The data in the existing DATA CENTER
is not affected.
When you start DATA CENTER for the first time, a database
update may be automatically started.
1
Start DATA CENTER 3.
2
Select Start update.
3
Wait until the update is complete.
4
Click Start Data Center.
IMPORTANT:
Depending on your computer and the volume of data, the
data transfer may take several minutes. Do not cancel the
database update once it has started as not all the data may
be transferred into the new database.
Updating from version 1 to version 3
It is not possible to automatically transfer data from
DATA CENTER 1 to DATA CENTER 3. However, you can
simply import the memory and LOGs into DATA CENTER 3
once installation is complete.