Operating instructions
4
www.sigmasport.com
SIGMA DAtA Center 3
2 DATA CENTER 3
The DATA CENTER 3 software enables you to evaluate your
SIGMA device’s data on a computer or MAC. There are three
types of data:
– Memory
– LOGs
– Device settings
NOTE:
For information about which data your device provides, please
see your device’s operating instructions. To optimally use
this data with the software, we recommend that you use an
optionally available docking station. This enables you to directly
transmit the data between your device and DATA CENTER 3.
You can use DATA CENTER 3 with the following SIGMA devices:
Bike computers:
– BC 509
– BC 512
– BC 8.12 and 8.12 ATS
– BC 1009 and BC 1009 STS
– BC 12.12 and BC 12.12 STS
– BC 14.12 ALTI
– BC 1609 and BC 1609 STS
– BC 16.12 and BC 16.12 STS/CAD
– BC 1909 HR
– BC 2209 TARGA/MHR
– ROX 8.0
– ROX 8.1
– ROX 9.0
– ROX 9.1
Running watches:
– RC 1209
– RC 14.11
If you have a docking station, your device will be automatically
identified and you can import the values into the software.
If you do not have a docking station, you need to create a SIGMA
device manually. DATA CENTER 3 will then only display the
functions of relevance to the selected SIGMA product as
whether used manually or automatically, DATA CENTER 3
always only displays the data that goes with the devices.
Use your keyboard to enter the values into the software.
Depending on the product, the following values can be entered
in DATA CENTER 3:
– Cumulative totals values for the device – for example total
distance.
– Memory with all the values recorded for the device –
for example the training time.
– LOGs – for example the route’s elevation profile
DATA CENTER 3 provides the following options:
– View and print total values
– View, compare and print training sessions and add notes
– View detailed statistics
– The docking station enables you to conveniently change the
device settings in DATA CENTER 3 and transmit these to
the device.
NOTE:
For information about which values are displayed and saved
in your SIGMA device, please see the device operating
instructions.
2.1 USING SIGMA DEVICES WITH DATA CENTER 3
2.2 SYSTEM REQUIREMENTS
2.2.1 WINDOWS COMPUTER
Minimum
–
x86-compatible processor with at least 2.33 GHz or Intel
®
Atom™ with at least 1.6 GHz for netbooks
–
512 MB RAM
–
Microsoft
®
Windows
®
XP Home, Professional or Tablet PC
Edition with Service Pack 3, Windows Server
®
2003,
Windows Server 2008, Windows Vista
®
Home Premium,
Business, Ultimate or Enterprise (also 64 Bit) with Service
Pack 2 or Windows 7
Recommended
–
Intel
®
Pentium
®
IV processor
– 1 GB RAM
The following software and hardware is required to use DATA CENTER 3: