Manual
Table Of Contents
- CONTENTS
- 1 FOREWORD
- 2 PACKAGING CONTENTS
- 3 SAFETY GUIDELINES
- 4 OVERVIEW
- 5 SETTING MODE
- 5.1 Activating the setting mode
- 5.2 Display setup
- 5.3 Button assignment in the setting mode
- 5.4 Brief guide to device settings
- 5.5 Establishing device settings
- 5.5.1 Setting the language
- 5.5.2 Setting the measuring unit
- 5.5.3 Calibration
- 5.5.4 Correction factor
- 5.5.5 Setting the date
- 5.5.6 Setting the time
- 5.5.7 Setting the gender
- 5.5.8 Setting the date of birth
- 5.5.9 Setting the weight
- 5.5.10 Setting the max. HR
- 5.5.11 Setting the training zone
- 5.5.12 Training with training zones
- 5.5.13 Setting up an individual training zone
- 5.5.14 Setting the total distance
- 5.5.15 Setting the total running time
- 5.5.16 Setting the total calories
- 5.5.17 Setting the contrast
- 5.5.18 Log interval
- 5.5.19 Logbook
- 5.5.20 Setting the button tones
- 5.5.21 TURNING THE ZONE ALARM ON AND OFF
- 6 CALIBRATION AND CORRECTION FACTOR
- 7 TRAINING MODE
- 7.1 Activating the training mode
- 7.2 Display setup
- 7.3 Button assignment in the training mode
- 7.4 Functions while training
- 7.5 Radio link with the R3 transmitter
- 7.6 Starting a training session
- 7.7 Interrupting a training session
- 7.8 Ending a training session
- 7.9 Training values after training
- 7.10 Resetting and saving the training values
- 8 TRAINING WITH LAPS
- 9 Data Transfer
- 10 MAINTENANCE AND CLEANING
- 11 TECHNICAL DATA
- 12 Warranty
80
www.sigmasport.com
7.1 ACTIVATING THE TRAINING MODE
To go to the training mode:
k From sleep mode
Press and hold any button.
k From setting mode
Press and hold the SET button.
7 TRAINING MODE
7.2 DISPLAY SETUP
k Arrow next to the HR value
In the example, the heart rate is below the selected training zone
and should be increased. If the heart rate is too high, the arrow
points down.
k Arrow next to the speed
In the example, the speed is below the current training average.
k Stopwatch icon
The training session has started and the stopwatch is running.
k Current heart rate
k Speed, distance or
running time
k SPEED (+) button:
Distance or time values
k PULSE (-) button:
Heart rate or calories burned