Manual
Table Of Contents
- CONTENTS
- 1 FOREWORD
- 2 PACKAGING CONTENTS
- 3 SAFETY GUIDELINES
- 4 OVERVIEW
- 5 SETTING MODE
- 5.1 Activating the setting mode
- 5.2 Display setup
- 5.3 Button assignment in the setting mode
- 5.4 Brief guide to device settings
- 5.5 Establishing device settings
- 5.5.1 Setting the language
- 5.5.2 Setting the measuring unit
- 5.5.3 Calibration
- 5.5.4 Correction factor
- 5.5.5 Setting the date
- 5.5.6 Setting the time
- 5.5.7 Setting the gender
- 5.5.8 Setting the date of birth
- 5.5.9 Setting the weight
- 5.5.10 Setting the max. HR
- 5.5.11 Setting the training zone
- 5.5.12 Training with training zones
- 5.5.13 Setting up an individual training zone
- 5.5.14 Setting the total distance
- 5.5.15 Setting the total running time
- 5.5.16 Setting the total calories
- 5.5.17 Setting the contrast
- 5.5.18 Log interval
- 5.5.19 Logbook
- 5.5.20 Setting the button tones
- 5.5.21 TURNING THE ZONE ALARM ON AND OFF
- 6 CALIBRATION AND CORRECTION FACTOR
- 7 TRAINING MODE
- 7.1 Activating the training mode
- 7.2 Display setup
- 7.3 Button assignment in the training mode
- 7.4 Functions while training
- 7.5 Radio link with the R3 transmitter
- 7.6 Starting a training session
- 7.7 Interrupting a training session
- 7.8 Ending a training session
- 7.9 Training values after training
- 7.10 Resetting and saving the training values
- 8 TRAINING WITH LAPS
- 9 Data Transfer
- 10 MAINTENANCE AND CLEANING
- 11 TECHNICAL DATA
- 12 Warranty
73
US/GB
5 SETTING MODE
5.5.19 LOGBOOK
The data stored in the logbook can be deleted here. Data stored in the
logbook can only be viewed using the DATA CENTER 2 software. Deleting
the logbook does not affect any other data. It is only possible to delete
the entire logbook; training units cannot be individually deleted.
To delete the logbook, select the entry “logbook” in setting mode and then
press the SET button. “Cancel” flashes. Press SET again to cancel the
process. Press SPEED (+) to select “Delete”. Confirm the deletion by
pressing the SET button. The logbook has now been irretrievably deleted.
5.5.20 SETTING THE BUTTON TONES
5.5.21 TURNING THE ZONE ALARM ON AND OFF
Follow the steps described in section 5.4 “Brief guide to device settings”.
Follow the steps described in section 5.4 “Brief guide to device settings”.