Manual
Table Of Contents
- CONTENTS
- 1 FOREWORD
- 2 PACKAGING CONTENTS
- 3 SAFETY GUIDELINES
- 4 OVERVIEW
- 5 SETTING MODE
- 5.1 Activating the setting mode
- 5.2 Display setup
- 5.3 Button assignment in the setting mode
- 5.4 Brief guide to device settings
- 5.5 Establishing device settings
- 5.5.1 Setting the language
- 5.5.2 Setting the measuring unit
- 5.5.3 Calibration
- 5.5.4 Correction factor
- 5.5.5 Setting the date
- 5.5.6 Setting the time
- 5.5.7 Setting the gender
- 5.5.8 Setting the date of birth
- 5.5.9 Setting the weight
- 5.5.10 Setting the max. HR
- 5.5.11 Setting the training zone
- 5.5.12 Training with training zones
- 5.5.13 Setting up an individual training zone
- 5.5.14 Setting the total distance
- 5.5.15 Setting the total running time
- 5.5.16 Setting the total calories
- 5.5.17 Setting the contrast
- 5.5.18 Log interval
- 5.5.19 Logbook
- 5.5.20 Setting the button tones
- 5.5.21 TURNING THE ZONE ALARM ON AND OFF
- 6 CALIBRATION AND CORRECTION FACTOR
- 7 TRAINING MODE
- 7.1 Activating the training mode
- 7.2 Display setup
- 7.3 Button assignment in the training mode
- 7.4 Functions while training
- 7.5 Radio link with the R3 transmitter
- 7.6 Starting a training session
- 7.7 Interrupting a training session
- 7.8 Ending a training session
- 7.9 Training values after training
- 7.10 Resetting and saving the training values
- 8 TRAINING WITH LAPS
- 9 Data Transfer
- 10 MAINTENANCE AND CLEANING
- 11 TECHNICAL DATA
- 12 Warranty
70
www.sigmasport.com
5.5.14 SETTING THE TOTAL DISTANCE
5 SETTING MODE
Example: You have bought a running computer and want to take the
total distance of 560 kilometers from your training diary.
Prerequisite: Your running computer must be in setting mode.
Press the SPEED (+) button repeatedly
to scroll until “Total Dist.” appears on the display.
Press the SET button. You will see zeros below the
total distance. The first digit flashes.
Press the SET button twice. The digit for the
hundreds flashes.
Press the SPEED (+) button five times until 5 is
displayed.
Press the SET button. The 5 is set and the tens flash.