Manual
Table Of Contents
- CONTENTS
- 1 FOREWORD
- 2 PACKAGING CONTENTS
- 3 SAFETY GUIDELINES
- 4 OVERVIEW
- 5 SETTING MODE
- 5.1 Activating the setting mode
- 5.2 Display setup
- 5.3 Button assignment in the setting mode
- 5.4 Brief guide to device settings
- 5.5 Establishing device settings
- 5.5.1 Setting the language
- 5.5.2 Setting the measuring unit
- 5.5.3 Calibration
- 5.5.4 Correction factor
- 5.5.5 Setting the date
- 5.5.6 Setting the time
- 5.5.7 Setting the gender
- 5.5.8 Setting the date of birth
- 5.5.9 Setting the weight
- 5.5.10 Setting the max. HR
- 5.5.11 Setting the training zone
- 5.5.12 Training with training zones
- 5.5.13 Setting up an individual training zone
- 5.5.14 Setting the total distance
- 5.5.15 Setting the total running time
- 5.5.16 Setting the total calories
- 5.5.17 Setting the contrast
- 5.5.18 Log interval
- 5.5.19 Logbook
- 5.5.20 Setting the button tones
- 5.5.21 TURNING THE ZONE ALARM ON AND OFF
- 6 CALIBRATION AND CORRECTION FACTOR
- 7 TRAINING MODE
- 7.1 Activating the training mode
- 7.2 Display setup
- 7.3 Button assignment in the training mode
- 7.4 Functions while training
- 7.5 Radio link with the R3 transmitter
- 7.6 Starting a training session
- 7.7 Interrupting a training session
- 7.8 Ending a training session
- 7.9 Training values after training
- 7.10 Resetting and saving the training values
- 8 TRAINING WITH LAPS
- 9 Data Transfer
- 10 MAINTENANCE AND CLEANING
- 11 TECHNICAL DATA
- 12 Warranty
58
www.sigmasport.com
4 OVERVIEW
4.5 OVERVIEW OF MODES AND FUNCTIONS
The heart rate monitor has three main modes (training mode,
setting mode and sleep mode). You can switch between these
modes by pressing and holding a button.
Sleep mode
Lap view
Setting mode
Training mode
The sleep mode will be displayed.
Release the PULSE (-) button.
4.4 PRESSING AND HOLDING DOWN BUTTONS