Operation Manual

OS SETTING

For the Optical Stabilizer, 3 unique view modes are available. This offers the most suited OS (Optical

Stabilizer) function for any shooting style (only available in lenses with a custom mode switch).

(OS setting screen)

1. Select the OS setting.

Click on [Customization] in the Home screen > [Customization Mode Setting] in the Customization Menu >

click on [C1] or [C2] in Customization Mode Setting > Click [OS Setting] in the C1 or C2 screen.

2. Select the desired mode.

Dynamic View Mode

This mode offers a recognizable OS effect to the image in the viewfinder. This helps to ensure the

composition of images quickly.

Standard

This is the default setting. The OS effect is well-balanced and suitable for various scenes.

Moderate View Mode

This mode offers an excellent compensation of camera shake, and achieves very smooth transition of the

image in the viewfinder. The composition of the image remains natural even when the angle of view keeps

changing.

CAUTION !!

Selectable mode depends on mounted lens.

3. Click on [OK] to go back to Customization Mode Setting C1 (or C2).

4. Click the [Rewriting] button and the dialog box for confirmation will appear.

5. Carefully read the content in the dialog box, and click [Agree] to process the customization, or click [Return]

to not process the customization.

6. Once the rewriting finishes, the dialog box for confirmation appears. Then, click [Close] and remove the

lens.

CAUTION !!

 Do not remove the lens or press the detachment button while updating firmware.

 Do not turn off the computer while updating firmware.

 Do not customize or change the current setting of the lens while updating firmware.

 In case updating firmware finishes unsuccessfully, a message [Rewriting the setting of the lens is

incomplete.] appears in the dialog box. Follow the instructions [RESET ALL CUSTOMIZATION] and proceed

resetting the customization.