Installation guide

4
Mac OS X
Mac OS will automatically detect and install the correct
driver for the FireWire ExpressCard. No additional driver
installation is needed.
To Verify Mac OS Installation
1. Open System Profiler.
2. Under Hardware, click PCI Cards, an IEEE 1394
Open HCI ExpressCard should be displayed.
Inserting/Removing Devices
When inserting/removing your FireWire device, hold
the ExpressCard and make sure it does not move around
inside the slot, otherwise, the ExpressCard may loose
connection or accidentally eject from the system.
Removing the ExpressCard
Windows
Before ejecting the FireWire ExpressCard from the
ExpressCard slot, use Windows Unplug/Eject Hardware
or Safely Remove Hardware feature, located in the
taskbar, to Stop it.
Mac OS
The FireWire ExpressCard can be ejected from the
ExpressCard slot at any time.