User guide

Page 78 Document No: 11294 LBA-USB User Guide
The factory sets the password. To obtain your password, call the Spiricon Service
Department at 435-753-3729 between the hours of 9:00 am and 5:00 pm MST.
The password will only be given out to the authorized individual whose name
appears on the original Purchase Order, the person whose name appears on the
completed warranty card, or to an individual who knows the Purchase Order
Number used to make the purchase. It can also be obtained by a written request
on company letterhead, signed by an officer of the company.
2.3 Pass/Fail Menu
The various Pass/Fail dialog boxes all operate in a similar fashion to provide test
selections and limits. For each desired test:
1. Enable the results item by checking on its selection box
2. Set the required test limit values
In some instances either or both Minimum and Maximum test limits may be set.
Keep the following in mind when establishing Pass/Fail criteria:
 Pass/Fail testing can only be performed on Current frame results.
 Pass/Fail testing can only be performed on computational results that are enabled in the
Computations dialog box.
 Pass/Fail testing is not allowed for Statistics results.
Most of the Pass/Fail dialog box edit control items are obvious in their meaning, and
methods. A few items are less obvious and are explained in the following sections.
2.3.1 Pass/Fail…
All pass fail operations are enabled or disabled by checking the Master Enable
Pass/Fail box.
Select the criteria (Passes or Fails) upon which an action or actions will be
performed.
Next, select the desired action or actions that will result:
 Beep – Each time the Pass/Fail condition is met, the PC will issue a system
beep.
 Stop Running – When the Pass/Fail condition is met, LBA-USB will halt and
display the offending frame.
If desired, repeat this process for the other criteria (Passes or Fails).