User guide

Page 70 Document No: 11294 LBA-USB User Guide

Main Controls

Located in a toolbar in the upper left corner of the main window, the main

controls consist of buttons for Start, Pause, Reset, Printer Setup, Print, and Exit

Program.

Start

Press the start button to begin data collection. However, if LBA-USB

is not collecting data in the background, then clicking this button will

be ineffective. In order for Beam Stability program to operate, the

user must make sure that LBA-USB is open and collecting data in

the background!

Pause

The pause button stops the data graphing but does not reset the

graphs. Thus data is preserved from one pause operation to the

next. Click the start button after pause to append data to the graph.

Reset

Press the reset button to delete all data in the charts and start over.

If desired, perform a Print operation before resetting the program,

as all data will be lost. The text in the Notes dialog is not cleared

when reset.

Printer

Setup

This button opens the standard Windows Printer Setup dialog box.

Press this button to print the entire Beam Stability window. A

Beam Stability print operation will not print LBA-USB beam image

and results. This must be done form within LBA-USB proper.

 Notes – The Notes area appears below the main controls. Enter any notations

here and these will be printed with the charts. Information entered here remains

from one reset to the next and from one application startup to the next.