User guide

Page 44 Document No: 11294 LBA-USB User Guide
Gamma Correction
If the camera employs a solid state CCD or MOS style detector, then its detector
responds linearly to monochromatic light. For linearly responding cameras the
Gamma setting should be set to 1.
Lens
Check this box if the camera is fitted with a lens. When enabled, the 2D image
orientation is adjusted to depict the image as if the observer is standing and
viewing the scene from behind the camera.
When disabled, the 2D image is oriented as if the observer is standing in front of
the camera looking at the surface of the detector.
2.2.5 Capture…
The Capture dialog box is divided into three areas, each controlling different
aspects of the image capture process:
Note: The user can assign certain of these capture control items to the Capture
Toolbar. The selected items appear on the toolbar in essentially the same order
that they are listed in this dialog box. The operation of each item from the Toolbar
is identical to their operation from this dialog box. For simplicity, the following
examples will refer only to the dialog box entries. Toolbar button icons will be
included in the titles when they exist.