User guide

Page 40 Document No: 11294 LBA-USB User Guide
 Try resetting the camera. Disconnect the USB cable, wait 10 seconds, and plug it
in again. Close and reopen the Camera dialog box to refresh the list.
 Contact the Spiricon Service Department for assistance.
If your camera is surrounded by parentheses and cannot be selected:
 The camera is currently selected by another instance of LBA-USB-SP running in
the same computer. Cameras can only be selected by one LBA-USB-SP instance
at one time. Select a different camera in the other instance of LBA-USB-SP, then
close and reopen the Camera dialog box. The camera should now be available
for selection.
 Contact the Spiricon Service Department for assistance.
If your camera is surrounded by brackets and cannot be selected:
 The camera has not been licensed for use with LBA-USB.
 Contact the Spiricon Service Department for assistance.
Video Mode, Format and Pixel Resolution
(LBA-USB-SP specific)
Select from a list of predetermined formats or establish a custom region of
interest (ROI).
Note: Not all of the SP cameras have the ability to create custom ROI formats.
Each selection defines a fixed set of offsets, widths and heights, along with the
optimal resolution for that format. These characteristics cannot be changed by
the user (unless a Custom ROI is selected – see below).
Sampling and Binning (LBA-USB-SP specific)
Those formats that include a sample parameter (2x2 sample, for example)
restrict data acquisition to only the top left pixel of each pixel group. Those
formats that include a binning parameter (2x2 binning, for example) accumulate
the values of each pixel in the group.
Note: Not all of the SP cameras have the ability to adjust sampling or binning.