User guide

LBA-USB User Guide Document No: 11294 Page 39
Select a Camera (LBA-USB-SP specific)
Any USB-SP style camera currently connected to your computer while LBA-USB-
SP is running, regardless of port, will appear in the Camera drop-down list. If a
camera is connected after the dialog is displayed, it may be necessary to close
and reopen the Camera dialog box to refresh the list.
Note: A camera disconnected after LBA-USB-SP has launched will remain active on
the list. The green/red icon located on the status bar indicates whether the
camera is currently connected to the computer.
Only one instance of LBA-USB-SP can select a camera at one time. Cameras
selected by another instance of LBA-USB-SP appear in parentheses and cannot
be selected.
Select the desired camera from the list in the Camera field.
If the desired camera does not appear:
 Verify that the camera is connected to the computer.
 Verify that the camera has power. (For example, the green LED on the side of
the USB camera should be lit.)