User guide

Page 30 Document No: 11294 LBA-USB User Guide
If Statistics results are enabled: These will not update during the printing
operation and thus will show the same values on each frame’s printout.
Note: To avoid unnecessary printing, keep the Current Frame Only box checked
unless multiple frames are absolutely required.
When printing 2D beam images, in either 128 or 16 colors, the dark violet
background color converts to a shade of light gray. This may not always be
appropriate, as the dark background may prove useful for transparencies, etc. To
restore the normal background appearance, enable the 2D Dark Background.
2.1.14 Print Setup…
This is the standard Windows style Print Setup dialog box. Select which printer
to use, and make some basic print format choices. Your specific printer’s
Options dialog box may also be accessible, offering other selections that pertain
to your particular printer.
2.1.15 Exit
Click on Exit from the File menu to leave the LBA-USB application and return to
the Windows desktop. This ends the current beam analysis session.
Before exiting, consider the following questions:
 Do you want to save the current setup to a configuration file?
 Have you correctly terminated any logging files?
 Do you need to save any frame data files?
 Do you need to save any important Reference frame data?
 Do you need to save a Gain Correction table for future use?