User guide

LBA-USB User Guide Document No: 11294 Page 29
2.1.13 Print…
Select the information to be sent to the printer within the Print dialog box. Open
this dialog box via the File menu.
Note: Simply clicking on the print toolbar button immediately produces output based
on the last configuration set in the Print dialog box.
Check the Beam Image box to print the contents of the beam display window.
The printed image contains everything visible in the window, limited only by the
resolution and color capabilities of your printer and Windows printer driver.
Check the Results box to print the results information. The printed results
consist of all enabled numerical results including Statistics and Histogram.
Note: For both of the above options, if the related child window (Beam, Results, or
Histogram) is minimized, then the associated item will not be printed. In other
words, “what you see is what you get.”
If both Beam Image and Results are checked, then the beam image will
appear first followed by the results set. If the Separate Pages box is checked,
then the beam image and results set will be printed on separate pages.
Check the Current Frame Only box to only print the currently displayed frame
and/or its results. If this box is not checked, direct LBA-USB to print multiple
frames by specifying the From Start Frame location, and the Number of
Frames to print. The Number of Frames can be set to 0 (indicates all the frames
in the buffer), or from 1 to the maximum number of frames in the frame buffer.
When printing multiple frames, observe that LBA-USB cycles through the
designated frame locations. It computes the required results for each frame and
then prints whatever is required. At the end of this process, the last frame
printed and its results appear on the display.