User guide

Page 28 Document No: 11294 LBA-USB User Guide
5. Statistics Results – Controlled by a set number of frames.
If Results Logging and Statistics are both in play, and if one of the Logging
features is in control, then statistics results are recorded into the results log file
when the logging operation terminates. See Begin and Terminate Logging in
section 2.1.11.
If Results Logging and Statistics are both in play, and if one of the Statistics
features is in control, then statistics results are recorded into the results log file
whenever the statistics collection cycle completes.
Using Logging, Statistics and Post Processing in
Combination
The following control priorities are in effect when any of the above features are
used in combination. The first enabled feature in the list has control.
1. Post Processing – Controlled by a set number of records/frames unless the number
is set to zero. (Note: Set this number to zero to allow the Logging and Statistics
operation to operate on multiple records from multiple files.)
2. Data or Results Logging – Controlled by a set number of frames.
3. Statistics Results – Controlled by a set number of frames.
Important: No timed operations are recognized when Post Processing is enabled.
If Results Logging and Statistics are both in play, and if the Logging feature
is in control, then statistics results are recorded into the results log file when the
logging operation is terminates. See Begin and Terminate Logging in section
2.1.11.
If Results Logging and Statistics are both in play, and if the Statistics feature
is in control, then the statistics results are recorded into the results log file when
the statistics collection cycle completes.