User guide

Page 10 Document No: 11294 LBA-USB User Guide
A complete LBA-USB/USB-SP systems consists of the following
equipment:
 The Spiricon LBA-USB/USB-SP software
 An L070, L130, L230, L11058, SP503, or SP620 camera and USB cable
 A Pentium style or compatible PC with:
•
USB 2.0 interface, either built into the computer or motherboard, or installed
via PCI card
•
Pentium, Pentium Dual/Quad core or equivalent processor based
motherboard
•
Graphics accelerator card (support for 1024 x 768 minimum)
•
At least 1GB of main memory, 2GB recommended
•
At least 15 MB of hard disk space available, much more (>1 GB) to log data
files
•
A high-resolution color monitor
•
Windows XP-32 Professional or Vista 32 operating system
•
A CD-ROM Drive
Optional equipment:
 USB 2.0 PCI interface card
 A printer with appropriate Windows compatible drivers
 LBS-100, BA-VIS, -NIR, or -BB Laser Beam Attenuator
Most laser beam energy requires attenuation before application to the camera
sensor. Attenuation requirements vary greatly depending upon application.
Spiricon offers optional equipment for beam attenuation. Consult your Spiricon
Representative or call the Spiricon's Sales Department for further information.