Specifications

45
MOTOFADER 64
ALL, GROUP, COPY/PASTE
ALL
Allows adjustment of ALL channels in the the network (up
to 64) to be adjusted simultaneously.
When pressing the ALL button the faders will move to 0dB.
Changes on the faders will be applied to all channels
relatively to their current state. E.g. if a channel is set to
-3dB at 250Hz and 250Hz is moved to +2dB at the ALL
display, the new actual setting will be -1dB for the channel.
The changes on the ALL function are remembered until
power down, or until Reset is selected on the display and
OK is depressed. When a Reset is performed, the fader
settings will return to 0dB, but without performing changes
on the EQ channels settings.
If a frequency on a channel is not able to perform the
requested relative change because it has reached the max.
or min. value (+/-12dB), an indicator will be switched on in
the display.
If the Graphic EQ is locked with the Security function, no
changes will be applied.
GROUP
A group of channels can be selected and adjusted
simultaneously. Press GROUP and select any channel
between 1 and 64.
The Group functionality is similar to the ALL channels
adjust function on the EQ Station itself, except that it is
here possible to make a pre-defined group of channels
instead of adjusting all channels.
The Group is selected on available channels in the device.
If in a network, a group can be made among all possible 64
channels.
When pressing the Group function, press or depress the
channel select buttons (LEDs will light up) to setup your
selection of channels.
The Group will be remembered until power-down.
Different groups can be built on MotoFaders and EQ
Stations
COPY/PASTE
The Copy /Paste functions allows you to easily copy the
Graphical EQ settings from the current channel to one or
more channels.
The function is especially useful when one channel is
adjusted in a monitor-mix setup, and these settings are
then copy/pasted into other channels as starting point for
further refinement.
Copy Paste - step by step:
• Select Channel on the Channel-select buttons and press
the Copy button.
• Select the channel or channels you want to paste into,
with the Channel-select buttons.
• Press Paste.
• Press OK to confirm. The transfer of settings is now
done.
Flatten EQ function
Pressing COPY and PASTE simultaneously for 2 seconds
will flatten the currently displayed Graphic EQ.
There is no "undo" option for this function.
DISPLAY
The Motofader 64 display.
The bright 2x16 character display with blue background will
show various information's such as e.g. frequency, level
and channel name.
HOME
Pressing the HOME button brings you back to the Channel
select view which you can see as a generic starting point.
When adjusting a fader level, selected frequency and gain
will be shown at the display.
If you want to monitor a specific frequency gain on the
display without adjusting the fader, use the arrow keys to
find these specific parameters.