Specifications

CONTROL SECTION

Basic Operation in the Control Section

• Press RECALL, STORE, SETUP or UTILITY to access these pages.

• Navigate using the ARROW keys.

• Use the ADJUST wheel to change parameter values.

Settings are instantly active.

Setting up Names, Device Number and Subnet Masks etc:

• Select the parameter using the ARROW keys and press OK.

• A display similar to the illustration below then pops up.

• Use the Left/Right ARROW keys to set cursor position

• Use the ADJUST wheel to select letter or number

• Use the Up/Down ARROW keys to select function:

Capital or lower-case letters; numbers or Cancel if you wish to abort the entire operation.

• Press OK to confirm and exit the display.

SELECT ARROW keys

ADJUST wheel for

parameter adjustment

OK key

For entering and

confirmation