User`s manual

PROGRAM AE

To make picture taking easier, the camera will automatically select

an appropriate combination of shutter speed and aperture value,

according to the brightness of the subject.

Set the Exposure Mode to the

position

(The exposure indicator is illuminated

in green.)

Press the shutter button “half-way” to

verify the focus and take the picture.

WARNING !!

 When is shown on the color LCD monitor, the camera is set slower

than 1/60. If this mark is displayed, please use the flash (P.80) or a tripod.

 If the subject is too bright or dark, both shutter speed and aperture value

indicators will blink and will show the limit values. If you take a picture with

these settings, the picture will be overexposed or underexposed.

PROGRAM SHIFT

You can change the combination of shutter speed and aperture value,

which were automatically selected by the camera. While turning the

Command-Dial, the combination of shutter speed and aperture value

will change within the range of combinations that give the equivalent

exposure.

■ It will be canceled automatically,

after taking the picture.