User`s manual

Close the Battery / Card Cover carefully

so as not to pinch the DC connector

code.

Connect the plug of the AC adapter and

jack of the DC connector.

WARNING!!

 While the Busy Lamp is on, please do not open the Battery Cover

or Card Cover. By doing so, the camera will turn off and result in

data loss. This could also cause damage to the camera and/or

memory card.

 When you have finished using the camera, please turn off the camera and

disconnect the plug from the wall socket.

 When using the DP3 Merrill with an AC power supply, the battery icon

shows the full symbol, regardless of the power level of the battery. If you

start to operate the camera on battery power, the display will change and

show the remaining power level of the battery.

After taking the DC connector off from

the camera body, close the DC connector

cover as shown in the illustration.